Metal watertight peripheral pump with permanent magnet drive system of T MAG-M series

 
Metal watertight peripheral pump with permanent magnet drive system of T MAG-M series
Manufacturer: MPUMPS
Available
-
+
 
 
Characteristics:
 
  • For Chemicals
    • Horizontal
    • Hermetically-tight


 
Description :
 

OPERATING LIMITS

  • Max. viscosity – 200 cSt 
  • Max. system pressure – 150 bar  
  • Flow – up to 9 m3/h 
  • Head – up to 90 m 
  • Temperature range – from -185 °F (-120 °C) to +302 °F (+150 °C) 
  • Electric motors – from 0,55 kW up to 30 kW 
  • Available ATEX II - / 2G cbk II C T2 - T5

Design features

The separation of liquid chamber/atmosphere by means of an isolation shell is the best solution to pump aggressive, explosive and toxic liquids, hydrocarbons, heat transfer liquids and liquids difficult to seal.

The hermetic sealless is the most convenient and safety solution for chemical, petrochemical and pharmaceutical industries.

A wide range of pumps covers the different performances. Low flow and high heads are the main characteristics of this pump design.

Particular design of the hydraulic, with self balancing impeller to improve the the wear ring life. Pump сasing and impeller high quality casting components.

RWP QUICK CHANGE CARTRIDGE KIT to guarantee an easy and fast maintenance.

The rear shell is made of one single piece, no welding, ellipsoidal profile that has been studied to withstand higher pressures than the traditional one.

AISI 316 is the standard construction (with pressure up to 25 bar), Hastelloy® C276 and titanium alloy upgrade when higher pressure ratings and increased efficiency are required (with max. system pressure up to 150 bar).

The high performance magnets can operate at liquid temperature of up to 662 °F (350 °C) without external cooling.

Field assembling of the product lubricated bearing arrangement does not require special tools.

The Bearing materials are available in four different types to provide the best solution for each application: Silicon Carbide (SSIC), Tungsten Carbide (TC), Tungsten Carbide in combination with metallized Carbon to allow accidental dry running transitory and PTFEC/G or PEEK compound for any applications where Special Carbon cannot be used. The adoption of elastic rings reduces the sleeve bearing loads and the thrust bearing loads to the minimum, to guarantee many years of maintenance-free operation.

 



 
 
Express shopping:



Log in:

Remember me
Password restore:
Instructions for password restore will be sent to the registration e-mail.
 
Register: